InSinkErator's stats
Reviews
- Review count0
- Helpfulness votes0
- First reviewNone
- Last reviewNone
- Featured reviews0
- Average rating0
Questions
- Question count0
- Helpfulness votes0
- First questionNone
- Last questionNone
- Featured questions0
- Answer count1179
- Helpfulness votes267
- First answerSeptember 12, 2013
- Last answerMay 13, 2024
- Featured answers0
- Best answers14
InSinkErator's Reviews
InSinkErator has not submitted any reviews.
InSinkErator's Questions
InSinkErator has not submitted any questions.
The InSinkErator Badger Series food waste disposers are a reliable and functional choice when affordability is the prime concern. Choose from three models, each with a space-saving compact design.
Replacement help
We have a model 5-75A that needs replacing. What model can we get?
Hi Mfuge, thanks for reaching out. The model 5-75 is a Badger 5, which we still make. When replacing an older Badger disposer like the 5-75 that has a threaded connection to the discharge opening with a current Badger disposer that has a 2-bolt connection to the discharge opening, check to see if you are using a 90-degree elbow pipe to connect to your plumbing or a straight pipe with a flared edge.
If using a 90-degree elbow pipe, the tailpipe provided with any new Badger disposer should line up with your current plumbing configuration without modification.
If you are using a straight pipe with a flared edge, then you will need a straight pipe with a flared edge that is 5/8 inch longer. If you have other questions, please reach out to us via https://support.insinkerator.com/ap....
If using a 90-degree elbow pipe, the tailpipe provided with any new Badger disposer should line up with your current plumbing configuration without modification.
If you are using a straight pipe with a flared edge, then you will need a straight pipe with a flared edge that is 5/8 inch longer. If you have other questions, please reach out to us via https://support.insinkerator.com/ap....
3 months, 3 weeks ago
by
InSinkErator
This InSinkErator Involve Series system, which includes the View Instant Hot Water Dispenser and re-engineered Stainless Steel Tank, provides 200�F near-boiling water and cool drinking water. Transitionally designed, the Involve View complements both soft contemporary and traditional design styles. Enjoy hot or cool water right when you need it - now.
Hello, I have had an HC-View and started to see water around the base while using the dispenser.
I believe that the O rings needs to be replaced. Please help with instructions on how to proceed.
Hi Moshe, thanks for reaching out, and we're sorry to hear that your unit is leaking. If it's coming from the base of the handle, unfortunately, your faucet will need to be replaced. To help you further, please contact us via https://support.insinkerator.com/ap... with your serial number.
3 months, 3 weeks ago
by
InSinkErator
Cam the faucet be turned 180° so the handle is on the left?
Hi Michie2024, thanks for the question. The HOT150 faucet is stationary and can't be turned 180 degrees. If you want a faucet that swivels, you can check out our Indulge Series faucets here: http://tinyurl.com/3ajvk8bu.
4 months ago
by
InSinkErator
Kick-start boiling water. Make oatmeal. Make tea. Warm baby bottles. Warm icecream scoops. Loosen jar lids. Clean surfaces. Make coffee. Loosen stuck on food. Rinse dirty utensils. Make gelatin. Warm butter knife. Remove stains. Make hot chocolate. Loosen stickers on jars. Thaw frozen foods.
Can the Hot 250 water outlet tube with the quick connector be shortened
Hi, thanks for asking. Yes, it can be shortened. When cutting plastic tubing, care must be taken to remove all burrs that may harm the quick-connect fittings. Avoid sharp bends, leave extra lengths for ease of servicing, then cut the tubing to the desired lengths.
4 months, 1 week ago
by
InSinkErator
Kick-start boiling water. Make oatmeal. Make tea. Warm baby bottles. Warm icecream scoops. Loosen jar lids. Clean surfaces. Make coffee. Loosen stuck on food. Rinse dirty utensils. Make gelatin. Warm butter knife. Remove stains. Make hot chocolate. Loosen stickers on jars. Thaw frozen foods.
Kick-start boiling water. Make oatmeal. Make tea. Warm baby bottles. Warm icecream scoops. Loosen jar lids. Clean surfaces. Make coffee. Loosen stuck on food. Rinse dirty utensils. Make gelatin. Warm butter knife. Remove stains. Make hot chocolate. Loosen stickers on jars. Thaw frozen foods.
Faucet servicing
Are the hot/cold faucets serviceable? ie, do you sell the cartridges or valves for the handles if/when they wear out?
Hi Brian1234, thanks for reaching out! The only part of a hot water dispenser that is replaceable is the aerator. No other parts are sold separately and are not designed to be replaced. If you have any concerns, please feel free to contact us via https://support.insinkerator.com/ap....
4 months, 1 week ago
by
InSinkErator
The InSinkErator� Evolution Essential XTR food waste disposer is the ideal choice for a wide range of applications. Why? Because it comes with something EXTRA! The Essential XTR includes a SinkTop Switch � for easy countertop activation, and includes a power cord in the box for added value. Convenience in one package.
Where is reset button
Serial number 23101267702
Hi Delano, thanks for reaching out. The model Power .75 doesn't have a reset button. It is equipped with an automatic overload switch. If the disposer is controlled by a wall switch, turn off the switch and allow the disposer to cool for a period of up to 20 minutes before turning it back on. If the disposer is controlled by a push-button air switch, turn it off and unplug it for a period of up to 20 minutes before plugging it back in.
4 months, 1 week ago
by
InSinkErator
The InSinkErator Badger Series food waste disposers are a reliable and functional choice when affordability is the prime concern. Choose from three models, each with a space-saving compact design.
Replacement size of rubber splash guard
What is the size of the rubber splash guards that would fit into the badger5 1/2 insinkerator model?
Hi KellMarl, thanks for the question. The one you should get for the Badger model is the Standard Mounting Gasket (https://insinkerator.emerson.com/en...).
4 months, 1 week ago
by
InSinkErator
Evolution 1.0HP Continous Feed Garbage Disposal with 1 Horsepower Available for Hardwire Connection and Outlet Installations with EZ Connect.
Hello! What is the electrical power load in watts for this product?
Hi rodrigomosp, thanks for the question. Here's the product specs sheet for your reference: http://tinyurl.com/3u9db7bc.
4 months, 1 week ago
by
InSinkErator
The InSinkErator Mounting Gasket Kit includes two replacement sink gaskets to be used in conjunction with specific InSinkErator disposer models. Refer to the included installation instructions for quick and easy gasket replacement. Not for use with Evolution Series and E606 disposers.