InSinkErator's stats
Reviews
- Review count0
- Helpfulness votes0
- First reviewNone
- Last reviewNone
- Featured reviews0
- Average rating0
Questions
- Question count0
- Helpfulness votes0
- First questionNone
- Last questionNone
- Featured questions0
- Answer count1184
- Helpfulness votes269
- First answerSeptember 12, 2013
- Last answerMay 28, 2024
- Featured answers0
- Best answers14
InSinkErator's Reviews
InSinkErator has not submitted any reviews.
InSinkErator's Questions
InSinkErator has not submitted any questions.
Hot 100 voltage
I’ve just ordered a hot100 but voltage in nz is 220 so obviously will need something to step down the voltage, is there anything insinkerator do that could be retro fitted to fix this ?
Cheers
Cheers
Hi, thanks for reaching out! This model is manufactured for and sold in the US and Canada. To ensure you are buying a unit specifically manufactured for your region's electrical and safety requirements, as well as validate the warranty, we recommend you purchase your InSinkErator product at an authorized retailer in the country where you will be living. For more information, please visit https://insinkerator.emerson.com/en....
5 months ago
by
InSinkErator
The InSinkErator stopper is designed to stop water and food particles from traveling down the drain. For use on all InSinkErator manufactured disposers, the stopper is easy to insert and remove from your sink drain. The stopper is available in a wide range of designer colors to complement many kitchen decors.
Where can I purchase a replacement gasket for this stopper?
Badger 500 model
Hi JPlumb, thanks for reaching out! The plastic stopper for the Badger 500 doesn't have a replacement gasket. However, if you're using the stopper in biscuit finish, the stopper gasket can be purchased directly through our parts depot, Carroll Parts (USA), at 800-654-3545 or carrollparts.com. It's part number is 5029.
5 months, 1 week ago
by
InSinkErator
Should this model have come with the anti-vibration tailpipe mount and spring clamp?
Hi Cafjr, thanks for reaching out! Yes, this model comes with an installation kit that includes a 2-bolt flex coupler, elbow pipe, wrenchette, and screws. If you need further assistance, please feel free to contact us via https://support.insinkerator.com/ap....
5 months, 2 weeks ago
by
InSinkErator
Kick-start boiling water. Make oatmeal. Make tea. Warm baby bottles. Warm icecream scoops. Loosen jar lids. Clean surfaces. Make coffee. Loosen stuck on food. Rinse dirty utensils. Make gelatin. Warm butter knife. Remove stains. Make hot chocolate. Loosen stickers on jars. Thaw frozen foods.
I have a pre-cut hole in my countertop that is 1 5/16" in diameter. That being just a bit smaller than 1 3/8" Will the Hot250 fit?
Hi Tusk, thanks for reaching out! The minimum sink hole size requirement for this model should be 1-3/8". For your reference, please check out the spec sheet here: http://tinyurl.com/35pc5fx9.
5 months, 2 weeks ago
by
InSinkErator
This InSinkErator Indulge Antique instant hot water dispenser model provides filtered 200�F near-boiling water for a variety of uses. Ornate, distinctive and refined, the technology of the Indulge Antique looks forward, while its style harkens back. Designed for use with the re-engineered InSinkErator Stainless Steel Tank and Filtration System, enjoy hot filtered water right when you need it - now.
need replacement parts
Either need plunger cartridge or o rings. Where can you buy parts for fgn2200 .
Leaking from handle
Leaking from handle
Hi peppyron, thanks for reaching out. We're sorry to hear that your faucet is leaking from the handle. Unfortunately, the only part of a hot water dispenser that is replaceable is the aerator. No other parts are sold separately and are not designed to be replaced. To assist you further, please reach out to us via https://support.insinkerator.com/ap....
5 months, 2 weeks ago
by
InSinkErator
Kick-start boiling water. Make oatmeal. Make tea. Warm baby bottles. Warm icecream scoops. Loosen jar lids. Clean surfaces. Make coffee. Loosen stuck on food. Rinse dirty utensils. Make gelatin. Warm butter knife. Remove stains. Make hot chocolate. Loosen stickers on jars. Thaw frozen foods.
What is the minimum temp?
Hi, thanks for the questions. The temperature is adjustable from 160˚F to 210˚F (factory pre-set at 200˚F). Please check out the full specs here: http://tinyurl.com/35pc5fx9.
5 months, 2 weeks ago
by
InSinkErator
Evolution 1.0HP Continous Feed Garbage Disposal with 1 Horsepower Available for Hardwire Connection and Outlet Installations with EZ Connect.
Why doesn’t the warranty on the website match what it says in the installation manual?
The installation manual says the Evolution 1.0HP has a 10 year warranty. The Insinkerator website says “11-year in home limited warranty”. Which is correct?
The InSinkErator Badger Series food waste disposers are a reliable and functional choice when affordability is the prime concern. Choose from three models, each with a space-saving compact design.
Can I remove cord and hard wire new Badger 5XP
The F-2000S Water Filtration System Plus is designed for exclusive use with InSinkErator water dispensing systems. It reduces particulates, chlorine taste and odor, plus cysts, lead, mercury, and other impurities allowing you to enjoy better-tasting hot beverages. It has a 1/4 in. quick-connect fitting and is replaced easily without contact with used filter material.
Can HWT-00 tank and F-HC3300SN faucet be used together?
If so, the instruction is asking to connect the white hose to the middle and clear hose to the right side on the HWT-00 tank. However, the white hose is too narrow to plug in the middle and clear hose is too wide/loose for the right side one on the HWT-00 tank. I did connect the other way around but there is no hot water. I wonder what did I do wrong or they are not compatible. Thank you!
Hi Uncola, thanks for reaching out! Yes, they're compatible. To connect the tubes of the faucet to the tank, without depressing the gray button, place the snap-connect fitting at the end of the blue 1/4" tube onto the left plastic fitting on the tank, pushing until it clicks into place. Slip the flexible white 7/16" tube over the barbed middle fitting. Slip the clear 5/16" tube over the far right smooth fitting. Make sure the tubes
are pushed down as far as possible. Check out page 9 of the installation guide here: https://tinyurl.com/p2vubm3j.
are pushed down as far as possible. Check out page 9 of the installation guide here: https://tinyurl.com/p2vubm3j.
5 months, 2 weeks ago
by
InSinkErator